MIG160PRO 160A 6-in-1 MIG Welder | 110V/220V
$249.00
One Welder. Six Ways to Get the Job Done.
MIG160PRO | 160A | 110V/220V | 6-in-1
From garage repairs and automotive projects to farm maintenance and custom metalwork, take on more welding tasks with one versatile machine. Start with smart synergic settings, then switch to manual control as your needs evolve.
Includes a 9.84 ft MIG gun, auto-darkening helmet, welding gloves, starter flux-cored wire, and useful accessories.

6-in-1 Versatility for Every Project
Different projects call for different welding techniques. The MIG160PRO supports six welding functions in one compact unit, giving you more options for repairs, maintenance and fabrication.

Gas MIG Welding
Solid wire and suitable shielding gas for automotive steel, workshop fabrication and projects where bead control matters.
Gasless Flux-Core MIG
Use self-shielded wire for suitable repairs without bringing a separate shielding gas cylinder.
Stick / MMA Welding
Compatible electrodes provide a practical option for routine steel maintenance and repair work.
Lift TIG Welding
An additional process for controlled welding on suitable steel and stainless steel.
Compatible TIG torch and argon supply are sold separately.
Timed Spot Welding
Set a 0.1–5.0 second weld cycle for repeatable short welds and suitable sheet-metal assembly.
Spool Gun Aluminum MIG
Use the aluminum mode with a compatible spool gun to help feed soft aluminum wire.
Compatible spool gun, aluminum wire and shielding gas equipment are sold separately.
Smart Synergic Welding Made Simple
Welding setup should not slow down your next project. Choose the wire type and diameter, and the MIG160PRO’s synergic system coordinates programmed MIG parameters to give you a practical starting point.
Synergic Starting Point
Manual Flexibility
Digital Interface
In synergic MIG mode, the display includes preset reference values rather than continuous real-time arc-current readings.

40W Feeding Power. Flexible Spool Options.
A consistent wire feed helps maintain arc stability. The MIG160PRO uses a 40W high-torque motor to drive welding wire through its included 9.84 ft MIG gun.
40W Wire Feed Motor
2LB / 10LB Spools
Four Diameter Selections
9.84FT MIG Gun
Use the proper drive roller for each wire type. A spare .030″/.035″ dual-groove roller is included.

Dual Voltage. More Places to Weld.
Switch between appropriate 110V household power for lighter tasks and a suitable 220V workshop supply when your job needs more output. The machine automatically adapts to its supported input voltage.
110V / Garage & DIY
220V / Full Rated Capacity
60% Duty Cycle

Dual-Voltage Flexibility, Without Misleading Power Claims
The included outlet adapter changes plug compatibility where appropriate; it does not convert 110V electricity into 220V. Full 160A output requires a suitable 220V circuit.
This unit is designed for home DIY, automotive maintenance, training and light fabrication rather than uninterrupted industrial production-line welding.
Advanced Controls for Better Welding Precision
Go beyond initial synergic setup with front-panel controls for your welding technique, trigger operation, arc response and gas timing.
Inductance: -10 to +10
Pre-Flow / Post-Flow
2T / 4T Trigger
0.1–5.0s Spot Timer
Synergic + Manual


Built for Garage, Automotive & Farm Projects
Put the right welding process to work on projects that matter: vehicle repairs, garage fabrication, metal gates and routine property maintenance.
Automotive & Sheet Metal
Garage DIY & Fabrication
Farm & Property Repairs
Welding Practice
Material preparation, appropriate welding procedure and operator technique remain important for every application.

A Welding Kit with the Essentials Included
The MIG160PRO comes with welding cables, practical starter consumables and protective gear. An auto-darkening welding helmet and split-leather gloves are included alongside the welding machine and 9.84 ft MIG gun.

Auto-Darkening Helmet & Welding Gloves
The included helmet offers an adjustable DIN 9–13 dark shade range for suitable welding applications. The set also includes a pair of 15.75-inch split-leather gloves.
Always wear appropriate flame-resistant clothing and other PPE, and follow the helmet’s safety instructions.

What’s Included in the Box
| Included Item | Quantity |
|---|---|
| MIG160PRO 160A multi-process welder | 1 |
| MIG welding gun, 9.84 ft / 3m | 1 |
| Electrode holder with 6.56 ft / 2m cable | 1 |
| Ground clamp with 6.56 ft / 2m cable | 1 |
| 6.56 ft gas hose with two hose clamps | 1 set |
| US standard power cord, 5.91 ft | 1 |
| 110V-to-220V outlet adapter (50A rated) | 1 |
| Auto-darkening welding helmet | 1 |
| Split-leather welding gloves, 15.75 in | 1 pair |
| .030 in flux-cored welding wire spool | 1 |
| Spare .030/.035 in dual-groove wire feed roller set | 1 set |
| MIG ceramic gas cups | 2 |
| .030 in contact tips | 3 |
| .035 in contact tips | 3 |
| User manual and warranty documentation | 1 set |
Additional equipment is required for certain modes: gas MIG needs suitable shielding gas and regulator; Lift TIG needs a compatible TIG torch; aluminum MIG requires a compatible spool gun. The latter two torches are not included.
MIG160PRO in Action — Unboxing & Test
Want a closer look before you decide? Explore this customer-created unboxing and test video alongside the product specifications and photos. Individual welding experiences may vary with setup, material, input power and technique.
MIG160PRO Technical Specifications
Power & Welding Performance
| Specification | Details |
|---|---|
| Product model | MIG160PRO |
| Type | 6-in-1 multi-process inverter welder |
| Input | Single-phase AC 110V / 220V, 50/60Hz |
| Maximum rated output | 160A on 220V |
| 110V output capability | Up to approximately 120A peak; sustained output limited by the supply circuit |
| Welding output range | 30–160A (full range requires 220V) |
| Rated duty cycle | 60% at 160A, 104°F (40°C) |
| MIG voltage reference | 15–22V synergic tracking range |
| Welding modes | Gas MIG; Gasless Flux-Core; Stick / MMA; Lift TIG; Timed Spot; Spool Gun Aluminum MIG |
| Spot timer | 0.1–5.0 seconds |
Wire Feeding & Welding Controls
| Specification | Details |
|---|---|
| Wire feed motor | 40W high-torque motor |
| Wire feed speed | 80–590 IPM |
| Wire diameter selections | .023 / .030 / .035 / .039 in |
| Wire spool sizes | 2LB and 10LB |
| Included MIG gun | 9.84 ft (3m) |
| MIG control | Synergic and manual |
| Inductance adjustment | -10 to +10 |
| Trigger modes | 2T / 4T |
| Gas timing | Adjustable pre-flow and post-flow |
| Interface | Dual digital display |
Machine Details
| Specification | Details |
|---|---|
| Machine dimensions | 15.15 × 7.2 × 11.81 in |
| Bare machine weight | 17.6 lb (8.0 kg) |
| Mild steel thickness guide | Approximately 24 gauge to 1/4 in (0.5–6.4mm), depending on setup |
| Ingress protection | IP21S |
| US power cord | 5.91 ft |
| Warranty | 12-month limited warranty |
Power, Compatibility & Safety Notes
A suitable 220V input circuit is required for full 160A output. On 110V, use a properly grounded and adequately rated circuit; a dedicated 20A branch circuit is recommended. The included plug adapter does not convert voltage. Follow the manual, observe the duty cycle, wear appropriate PPE and provide adequate ventilation.
Download the MIG160PRO User Manual
Keep the MIG160PRO instructions close at hand. The downloadable 30-page manual covers setup, wire threading, control-panel operation, process connections, welding reference information, maintenance, troubleshooting and helmet instructions.
Format: PDF | Length: 30 pages | Language: English
Frequently Asked Questions
Can I use the MIG160PRO on a standard 110V household outlet?
What welding processes does the MIG160PRO support?
Are the Lift TIG torch and aluminum spool gun included?
What wire diameters and spool sizes can I use?
Does the MIG160PRO automatically set welding parameters?
What comes in the box?
Can it weld 1/4-inch mild steel?
Is it intended for continuous industrial production?
Where can I get the instruction manual?
Join CARROT TOOL
Explore product benefits and create an account for eligible equipment warranty extension where available. Accessory discounts are shown on qualifying products when the coupon is active.



















The 40W wire feeder runs smoothly without constant jams, and the longer torch gives me more flexibility while working. I also like the 6-in-1 functionality, including gas and gasless MIG, stick, scratch-start TIG, and spot welding. It can also handle aluminum welding with a separately purchased spool gun.
The included welding gloves and auto-darkening helmet are a nice bonus, especially for beginners. Just keep in mind that TIG is scratch-start without HF, and the spool gun is not included.
Overall, a solid all-in-one welder for home projects and small repairs!