Capacitor Discharge Stud Welder | RSR-2500 110V M3–M10
$1,899.00
Precision Stud Welding Starts Here.
Bring fast, focused capacitor-discharge welding to metal fabrication, sheet-metal assembly, and industrial fastening work. The RSR-2500 attaches compatible metal studs directly to prepared workpieces using short electrical discharge pulses.
Adjust the charging voltage for your application, monitor machine status from the front panel, and work with the included 16.4 ft (5m) welding gun.

Fast Stud Welding for Thin Sheet Metal
When welding studs onto thin metal components, heat input matters. The RSR-2500 uses a brief capacitor-discharge pulse to concentrate welding energy at the stud-to-workpiece interface, helping limit prolonged heating of surrounding metal.

Designed for 0.5–3mm Metal Plates
The RSR-2500 is specified for suitable thin-sheet applications with material thicknesses from 0.5mm to 3mm (approximately 0.020–0.118 in). Its short discharge cycle supports stud attachment without the need to drill through the panel in suitable applications.
Approximately 3–6 Milliseconds
The welding discharge itself takes only milliseconds. Actual surface appearance and joint performance depend on material pairing, surface condition, stud size, and selected settings.
Focused Heat Input
Short electrical discharge helps limit the time nearby metal is exposed to welding heat.
Multiple Working Positions
The welding gun supports suitable attachment positions around fabricated panels and assemblies.
Real Welding Examples
See sample results across selected metal and stud combinations; verify your own application with test welds.
M3–M10 Stud Welding Versatility
Six metric stud sizes allow one welding system to support different attachment points in metalworking and assembly. Match the stud, holder, base material, and welding energy to the specific application.
Compatible Material Families
Designed for suitable combinations of low-carbon steel, stainless steel, copper, copper alloys, aluminum, and aluminum alloys. Not every stud and workpiece pairing is interchangeable; material compatibility and weld quality must be verified for each job.
Adjust the Setup for the Workpiece
Use the appropriate holder and charging-voltage setting for the intended stud diameter, material, and sheet thickness. The standard package contains 60 starter studs across six sizes.
Includes 10 studs each in M3, M4, M5, M6, M8 and M10.
Stud clamps are included for M3, M4, M5 and M6 only. Compatible M8 and M10 holders are not included in the listed package contents.
Adjustable Charging Voltage for Greater Control
Stud diameter, workpiece material, and thickness affect the welding setup. The RSR-2500 provides continuously adjustable charging voltage so operators can select an appropriate setting and verify it before production welding.

33–198V Charging Voltage
Use the front-mounted digital display and dedicated + / − adjustment buttons to select a charging-voltage setting within the specified 33–198V range.
Clear Status Indicators
The control panel identifies Charge, Discharge, Ready and Welding states, providing useful operating feedback during setup.
High-Capacity Energy Storage for Efficient Work
The RSR-2500 uses capacitor-discharge technology to store electrical energy and release it through a rapid welding pulse. It is intended for compatible repetitive stud attachment work, where discharge time and workflow efficiency both matter.
108,000μF Capacitor Capacity
The high-capacity capacitor system stores energy before each welding discharge.
3–6ms Welding Discharge
A short pulse delivers energy at the attachment interface rather than relying on prolonged heating.
15–50 Studs/Minute
Specified production-rate range, depending on stud diameter and operating conditions.
Focused Energy. Practical Productivity.
The welding pulse lasts milliseconds, but real production speed also includes recharging, preparation, positioning and operator handling. Use suitable parameters and test welds when changing workpieces or stud sizes.
An Alternative to Drilling Through Panels
For appropriate workpieces and fastening requirements, capacitor-discharge stud welding provides a way to create metal stud attachment points directly on a surface without drilling through the entire panel.
Built for Metalworking & Industrial Applications
From fabricated panels to industrial equipment components, the RSR-2500 offers stud attachment options for suitable materials and fastening requirements.

Automotive Components
Create suitable mounting points on vehicle panels, brackets and fabricated component assemblies.
Sheet-Metal Fabrication
Attach compatible studs to cabinets, panels and metal equipment housings.
Electrical Enclosures
Support component and bracket mounting in suitable electrical equipment housings.
Industrial Insulation
Use appropriate insulation pins or fastening studs on suitable metal equipment and ductwork.
Metal Vessels & General Fabrication
Add selected welded attachment points to fabricated metal products and assemblies.
The application image illustrates an industrial sector; it does not establish that the pictured production line uses this specific machine.
Practical Controls & Durable Machine Construction
An organized control layout and accessible connections help operators prepare the RSR-2500 for stud welding. Internal components include a copper-wound toroidal transformer, copper output components, and a flat thyristor switching design.
Dual Ground Wire Connections
Two ground leads and dedicated front-panel connection points support appropriate workpiece connection.
16.4 ft (5m) Welding Gun
A long gun cable provides additional working reach around panels and assemblies.
Copper-Wound Transformer
A toroidal transformer with copper windings forms part of the internal electrical design.
Copper Outputs & Flat Thyristor
Copper output components and a flat thyristor form part of the energy-discharge circuit.
Steel Housing & Cooling Fan
Steel enclosure and a rear-mounted fan provide protected mounting and cooling airflow.
Everything Included with Your Stud Welder
The standard package lists the welding machine, a 16.4 ft (5m) gun, two grounding wires, 60 welding studs, four stud clamps, two wrenches, and the supplied documentation. The itemized list below follows the supplied Word product specification.
| Included Item | Quantity |
|---|---|
| RSR-2500 Capacitor Discharge Stud Welding Machine | 1 |
| Welding Gun with 16.4 ft (5m) Cable | 1 |
| Ground Wires | 2 |
| M3 Welding Studs | 10 |
| M4 Welding Studs | 10 |
| M5 Welding Studs | 10 |
| M6 Welding Studs | 10 |
| M8 Welding Studs | 10 |
| M10 Welding Studs | 10 |
| M3 Stud Clamp | 1 |
| M4 Stud Clamp | 1 |
| M5 Stud Clamp | 1 |
| M6 Stud Clamp | 1 |
| User's Manual | 1 |
| Tips for Use Document | 1 |
| Wrenches | 2 |
RSR-2500 Technical Specifications
Review the electrical specifications, welding capabilities and package information to determine whether the machine matches your intended application.
Electrical & Welding Performance
| Specification | Details |
|---|---|
| Product Model | RSR-2500 |
| Welding Process | Capacitor Discharge (CD) Stud Welding |
| Input Voltage | 110V AC |
| Input Frequency | 50/60Hz |
| Charging Voltage | 33–198V, Continuously Adjustable |
| Capacitor Capacity | 108,000μF |
| Supported Stud Sizes | M3, M4, M5, M6, M8 and M10 |
| Welding Discharge Time | Approximately 3–6ms |
| Specified Welding Rate | Approximately 15–50 studs/minute, depending on stud diameter and operating conditions |
| Applicable Sheet Thickness | 0.5–3mm (approximately 0.020–0.118 in) |
Materials, Controls & Construction
| Specification | Details |
|---|---|
| Applicable Material Families | Suitable combinations of low-carbon steel, stainless steel, copper, copper alloys, aluminum and aluminum alloys |
| Charging Voltage Control | Digital display with + and − adjustment buttons |
| Operating Status Indicators | Charge / Discharge / Ready / Welding |
| Welding Gun Cable | 16.4 ft (5m) |
| Grounding Connections | Two connection points |
| Transformer | Copper-wound toroidal transformer |
| Output Components | Copper positive and negative output components |
| Switching Component | Flat thyristor |
| Housing | Steel |
| Protection Rating | IP21S |
| Color | Gray |
Item & Package Information
| Specification | Details |
|---|---|
| Listed Item Weight | 49.9 lb |
| Listed Package Dimensions | 22 × 15 × 13 in |
| Included Welding Studs | 60 total: 10 each of M3, M4, M5, M6, M8 and M10 |
| Included Stud Clamps | 4 total: M3, M4, M5 and M6 |
| Included Grounding Wires | 2 |
| Included Wrenches | 2 |
| Included Documentation | User's Manual and Tips for Use |
Frequently Asked Questions
Find answers about stud sizes, material compatibility, electrical supply and what arrives in the package.
What stud sizes can the RSR-2500 weld?
Are M8 and M10 stud clamps included?
What metals can this stud welder work with?
Can the RSR-2500 weld studs to thin sheet metal?
Does this machine require 110V or 220V power?
How fast does the machine weld studs?
Can I attach studs without drilling through the panel?
What accessories come in the package?
What preparation and protective equipment are required?
Join CARROT TOOL
Explore product benefits and create an account for eligible equipment warranty extension where available. Accessory discounts are shown on qualifying products when the coupon is active.
















Reviews
There are no reviews yet.